Decorative Concrete Resurfacing in San Fernando, CA
WHAT WE DO
A microtopping can go down as thin as 20 mils, about 0.02 inch, while stampable and self-leveling overlays generally start at 1/4 inch, and every system depends on a stable slab underneath. INFINITE CONCRETE CREATIONS, INC.
offers decorative concrete resurfacing in San Fernando, CA, grinding and profiling the old surface, filling cracks, then applying microtoppings, stamped overlays, spray-down textures, or self-leveling toppings in the color you choose. Our family-owned team treats worn patios, pool decks, and walkways as a fresh canvas.
WHERE WE RESURFACE
Postwar Patios and Sun-Bleached Pool Decks
Plenty of Valley homes date to the years after World War II, and their original patios and walks are often solid underneath a tired, pitted top. Summer heat is the other factor, because overlays set faster when the slab runs hot, so we mix in small batches and often start early in the morning. We see both conditions on ranch homes in Sherman Oaks, CA, backyard pool decks in Burbank, CA, and courtyards around San Fernando, CA, and we test each slab before recommending an overlay for it.
Overlay Systems We Apply Over Sound Concrete
Each resurfacing system suits a different slab, traffic level, and look, so we match the product to how the surface is used and to the texture, pattern, and thickness it calls for.
01
Microtopping Resurfacing
Troweled on in two or three very thin coats, a microtopping creates a smooth, modern finish on patios, entries, and interior slabs. It accepts integral tint, stain, or hand-troweled swirl patterns, and it performs best where foot traffic stays light.
02
Stamped Overlays
Applied at roughly 1/4 inch or more, a stampable overlay accepts the same stone, slate, and brick textures as new stamped concrete. It gives a plain broom-finish patio the look of cut stone without tearing out the original slab underneath.
03
Spray-Down Knockdown Texture
Sprayed across the surface in a splatter pattern, a cement-based mix is lightly flattened with a trowel once it begins to set. The raised, rounded texture adds grip underfoot and suits pool decks, walkways, and patios that see bare feet and splashing.
04
Self-Leveling Overlays
Poured rather than troweled, these flowable toppings spread out to form a flat, even surface at 1/4 inch or greater. They correct minor dips and wear on garage floors and interior slabs, and they can be tinted or scored once they cure.
05
Pool Deck Resurfacing
Chlorinated splash-out, bare feet, and constant sun wear pool decks faster than most slabs. Resurfacing covers pitting and faded color with a textured overlay, and a sealer with anti-skid grit keeps the deck comfortable and safer to walk on when wet.
06
Patio and Walkway Resurfacing
Worn broom finishes, patched spots, and mismatched color along a patio or garden path disappear under a single continuous overlay. We can add borders, score lines, or a stamped field so the refreshed surface looks designed instead of pieced together over time.
TESTIMONIALS
What Our Customers Say
Colors, Patterns, and Textures to Choose From
Once the overlay system is set, the design decisions begin, and each of these choices changes the finished appearance, the feel underfoot, and how much upkeep the surface asks of you afterward.
01
Integral Tinted Overlays
Pigment mixed right into the overlay material carries color through the full thickness of the topping, so light scuffs do not reveal gray underneath. Earth tones, warm tans, and cool grays pair easily with stucco, stone, and wood trim.
02
Acid and Water-Based Stains
Stains applied after the overlay cures create variegated, marbled color that no two slabs share. Acid stains react with the cement for translucent earthy tones, while water-based stains offer a wider palette, including blues, greens, and deep charcoals.
03
Stone and Slate Textures
Stamping mats pressed into a fresh overlay reproduce ashlar slate, flagstone, cobblestone, or brick. Adding a darker release color highlights the grout lines and texture, giving the surface the depth of natural stone without the weight or cost of real stone.
04
Scored Tile and Borders
Shallow saw cuts divide a smooth overlay into large tiles, diamonds, or bands along the edges. Borders in a contrasting color frame a patio or pool deck and help a resurfaced area line up with steps, walls, and doorways.
05
Texture for Traction
Level, glassy finishes suit covered patios and interiors, while knockdown, orange-peel, or broomed textures give wet areas better grip. We match texture to how each space is used, balancing comfort underfoot, ease of cleaning, and slip resistance around water.
06
Sealer Sheen
The final sealer sets the overall look, from a natural matte to a satin or high-gloss finish that deepens color. Glossier coats tend to show wear sooner and can get slick, so outdoor surfaces usually benefit from a lower sheen.
WHO WE ARE
Some Slabs Need Replacing, and We Will Say So
An overlay bonds to whatever sits below it, so a slab that is heaving, sinking, or split by wide moving cracks will pass those problems straight through to the finished topping. Our licensed and insured team checks for those conditions first and tells you plainly when resurfacing is the wrong call. When the base is sound, our decorative specialists match color, pattern, and texture to your home, explain each step, and hold to the schedule we set. Use our contact page to request an estimate for your resurfacing project.
Why Choose INFINITE CONCRETE CREATIONS, INC.
Built On Trust & Craftsmanship
01
Quality Concrete Craftsmanship
We take pride in delivering durable, high-quality concrete work built with skilled craftsmanship and dependable materials. Every project is completed with long-term performance and appearance in mind.
02
Personalized Custom Designs
We tailor each project to the property and the client's vision, offering a wide variety of customizable colors, textures, patterns, and finishes. We can mix and match design elements to create concrete work that is truly unique.
03
Precision in Every Detail
We approach every project with careful planning and precise attention to detail, from preparation and forming to finishing and final cleanup. Our goal is a clean, professional result that reflects the quality of our work.
04
Experienced Certified Professionals
Our team brings extensive hands-on experience, specialized skills, and professional credentials to every project. We use proven techniques and industry knowledge to complete concrete projects safely, accurately, and professionally.
FAQs - Frequently Asked Questions
How long does concrete resurfacing last?
Most professionally installed overlays last 8 to 15 years, and careful maintenance can stretch that further. Surface preparation matters most, since poor prep drives nearly all delamination, and resealing every few years protects the color and texture from sun and wear.
Can you resurface concrete that has cracks?
Hairline and stable cracks can be filled and covered as part of the prep. Wide, spreading cracks or panels with vertical displacement point to movement below the slab, and an overlay placed over them would simply crack again in the same place.
How thick is a concrete overlay?
Thickness depends on the system. At INFINITE CONCRETE CREATIONS, INC., we apply microtoppings in San Fernando, CA, at a few hundredths of an inch per coat, while stamped and self-leveling overlays typically go down at 1/4 inch or more.
Is resurfacing better than replacing concrete?
Resurfacing makes sense when the slab is structurally sound and the problem is only cosmetic, such as fading, scaling, or shallow pitting. Replacement is the better choice when concrete is sinking, heaving, badly cracked, or sitting on a failed base.
What is the difference between an overlay and a microtopping?
Microtoppings are a type of overlay applied in coats about the thickness of a dime, creating sleek, modern finishes. Thicker overlays can be stamped or textured, hide more surface damage, and generally handle heavier traffic than a microtopping.
Can you resurface a pool deck?
Yes, pool decks are well suited to resurfacing. Once the surface is cleaned and profiled, a textured overlay such as a spray-down knockdown finish goes on, followed by a sealer that resists pool chemicals and adds traction for wet feet.
How do you prepare concrete for resurfacing?
Preparation starts with removing old sealers, coatings, and contaminants, then diamond grinding to open the surface so the overlay can bond. On every job in San Fernando, CA, INFINITE CONCRETE CREATIONS, INC. also fills cracks and repairs spalls before any topping goes down.
Does resurfaced concrete crack?
It can, usually because of weak prep, an overlay placed below its minimum thickness, or movement in the slab underneath. Existing joints should be carried up through the overlay so the topping has a place to move without cracking at random.
Give Tired Concrete A New Face Without Tearing It Out
Breaking out an old patio means demolition, hauling, and a new pour, yet many aging slabs only need their top layer replaced. When the slab underneath holds firm, an overlay delivers fresh color, pattern, and texture with far less disruption to your yard. INFINITE CONCRETE CREATIONS, INC. resurfaces patios, pool decks, walkways, and garage floors across San Fernando, CA, and surrounding cities, and we will be upfront about whether your slab qualifies. Look at samples, compare finishes, and think it over as long as you like. Once a finish feels right to you, send photos and measurements through our estimate request form, and we will take it from there.