Masonry Repair & Restoration in San Fernando, CA
WHAT WE DO
Repointing mortar must be softer and more vapor permeable than the brick or stone it joins, because harder mortar traps moisture that can pop faces off the surrounding masonry. INFINITE CONCRETE CREATIONS, INC.
handles masonry repair and restoration in San Fernando, CA, raking failed joints to a depth of 2 to 2½ times their width, replacing damaged brick and block, resetting stone, rebuilding caps, and clearing efflorescence. With 8+ years behind us, we match mortar color and texture to the original wall.
WHERE WE RESTORE
Coastal Salt, Valley Sun, and Aging Garden Walls
Masonry across greater Los Angeles wears out in different ways, depending on where it stands. Near the ocean in Santa Monica, CA, salt-laden air adds soluble salts that later bloom as white crust and loosen weak joints. Inland, older brick planters and garden walls in Arcadia, CA, and Burbank, CA, bake through long summers, soak up the occasional hard winter storm, and shed caps after years of small shakes. From San Fernando, CA, outward, we diagnose each wall on site and pick mortar, cleaning methods, and replacement units that suit it.
Masonry Repairs That Match What Is Already There
Restoration work succeeds when the repair disappears into the existing wall, so each service below focuses on fixing the underlying problem while keeping the color, texture, and character of your brick, block, or stone.
01
Repointing and Tuckpointing
Crumbling mortar is chiseled or ground out, then replaced in thin layers with a mix matched for strength and color. Each layer firms up before the next goes in, and the final joint is tooled to the profile the wall already has.
02
Brick and Block Replacement
Individual units that are cracked, spalled, or broken get cut out without disturbing their neighbors. Replacements are sourced to match size and color as closely as possible, whether that means reclaimed brick for a vintage wall or a matching block face.
03
Stone Resetting
Loose or fallen stones on walls, columns, and planters are cleaned, rebedded in fresh mortar, and aligned with the surrounding pattern. For stones that keep working loose, we look behind them for voids or trapped water and correct that before resetting.
04
Efflorescence Removal
Surface salt deposits usually come off with dry brushing followed by a clean-water rinse. Stubborn buildup may need a mild cleaner applied carefully, and we track down the moisture source feeding the salts so the bloom does not keep returning.
05
Cap and Coping Repair
Wall caps take the most sun and rain of any part of a wall. Damaged caps are lifted off, the bed is cleaned, and new or salvaged caps are set with a slight overhang and sloped joints that shed water outward.
06
Leaning Wall Assessment
A wall that tips out of plumb may have a failing footing, root pressure, or water building up behind it. We measure the lean, check cracks and footing conditions, and explain whether targeted repair can stabilize it or rebuilding is safer.
TESTIMONIALS
What Our Customers Say
Signs Your Masonry Is Asking for Repair
Trouble usually shows up long before masonry fails, and catching these six signs early often keeps a repair small, limits how much original material has to be replaced, and protects the look you already love.
01
Recessed or Sandy Mortar
Joints that sit well behind the brick face or rub away under a fingertip have lost their binder. Water now enters those gaps freely, and each wet season carries more mortar away until bricks themselves start to shift.
02
Stair-Step Cracking
Cracks that zigzag diagonally through mortar joints often point to settlement beneath one end of the wall. Hairline versions can be monitored, but widening gaps, or cracks that split through the units themselves, deserve a closer look soon.
03
White Powder or Crust
Efflorescence forms when soluble salts, moisture, and evaporation come together on masonry. A light haze after new masonry work often fades on its own, but recurring bloom signals water moving through the wall and is worth tracing to its source.
04
Flaking or Spalled Faces
Brick or stone that sheds its outer surface in chips or sheets is usually trapping moisture. A past repair with rigid cement mortar is a frequent culprit, since it forces water to escape through the masonry instead of the joints.
05
Loose or Cracked Caps
Caps that rock underfoot, show open joints, or have slid slightly out of line let rain pour straight into the wall core. Fixing them promptly protects everything below, especially on planters and garden walls that stay damp from irrigation.
06
Leaning or Bulging Sections
Any wall drifting out of plumb or bowing near the middle is carrying more load than it was built for. Keep people and vehicles clear of it, and have the footing and drainage checked before deciding between repair and replacement.
WHO WE ARE
Sometimes the Right Fix Is Smaller Than You Expect
We will tell you when a wall needs a few joints repointed and a cap reset rather than a full rebuild. Our family-owned team starts every repair by finding the cause, whether water intrusion, overly hard mortar, or a settled footing. Because decorative work is our specialty, we mix test batches until new joints blend with the originals. You get clear explanations, a realistic scope, and consistent scheduling on homes and commercial buildings alike. Share photos of the damage through our contact page to request an estimate.
Why Choose INFINITE CONCRETE CREATIONS, INC.
Built On Trust & Craftsmanship
01
Quality Concrete Craftsmanship
We take pride in delivering durable, high-quality concrete work built with skilled craftsmanship and dependable materials. Every project is completed with long-term performance and appearance in mind.
02
Personalized Custom Designs
We tailor each project to the property and the client's vision, offering a wide variety of customizable colors, textures, patterns, and finishes. We can mix and match design elements to create concrete work that is truly unique.
03
Precision in Every Detail
We approach every project with careful planning and precise attention to detail, from preparation and forming to finishing and final cleanup. Our goal is a clean, professional result that reflects the quality of our work.
04
Experienced Certified Professionals
Our team brings extensive hands-on experience, specialized skills, and professional credentials to every project. We use proven techniques and industry knowledge to complete concrete projects safely, accurately, and professionally.
FAQs - Frequently Asked Questions
What is the difference between repointing and tuckpointing?
Both involve fresh mortar. Repointing means removing deteriorated mortar and packing new material into the joints. Tuckpointing, strictly, adds a thin contrasting line along the finished joint to make it look finer, though many people now use both words for the same repair.
How do you know when brick needs repointing?
Look for mortar that is recessed, crumbling, cracked, or soft enough to scrape out with a key. Gaps along the joints, damp patches inside, and bricks that wiggle all suggest the mortar has reached the end of its service life.
What causes white powder on brick walls?
That powder is efflorescence, left behind when water dissolves salts inside the masonry and evaporates at the surface. Dry brushing followed by rinsing with plain water removes most of it, but stopping the moisture source keeps it from coming back.
Can new mortar match the color of existing mortar?
Usually, yes. At INFINITE CONCRETE CREATIONS, INC., we match mortar for walls around San Fernando, CA, by blending sand, cement, lime, and pigment in test batches, then letting samples cure so we can compare dried color rather than wet color.
Why shouldn't you use hard cement mortar on historic brick?
Mortar is meant to be the sacrificial part of a wall. When it is harder and less permeable than the brick, moisture escapes through the brick instead, and repeated wetting and drying can break the faces off the units over time.
How deep should old mortar be removed before repointing?
Preservation guidance calls for raking out deteriorated mortar to at least 2 to 2½ times the width of the joint. Going that deep gives the new mortar enough grip and prevents the thin, shallow patches that pop out within a few seasons.
Can a cracked masonry wall be repaired instead of rebuilt?
Often it can. Cracks through mortar joints on a stable footing can usually be repointed, and damaged units can be swapped individually. Rebuilding becomes the better answer when the wall is leaning, the footing has failed, or cracks keep widening.
Is a leaning brick wall dangerous?
It can be. Our team at INFINITE CONCRETE CREATIONS, INC. assesses leaning walls in San Fernando, CA, by measuring how far they have moved and why, since a wall past its tipping point can fall suddenly, especially after heavy rain softens the ground.
Bring Back The Wall You Fell For In The First Place
Old brick and stone carry a character that new materials struggle to copy, which is why careful repair is often worth more than replacement. INFINITE CONCRETE CREATIONS, INC. restores garden walls, planters, columns, and building masonry across San Fernando, CA, with mortar matched for strength and color, units matched for size and tone, and a clear plan built around the real cause of the damage. Take time to gather photos, note when you first saw the cracks, and compare options without pressure. When you would like a closer look, reach us through our estimate request form or contact page, and we will book an inspection.