OUR SERVICES

Retaining Wall Installation

Poured, block, stone, and brick walls hold back hillside soil and create level yard space. Each one gets a proper footing, drain rock, and perforated pipe behind it, so winter storms cannot build pressure against the wall.

Concrete Foundation Slabs

Homes, additions, ADUs, and garages start on slabs formed over compacted soil, a vapor retarder, and tied rebar. Utility sleeves, thickened edges, and careful curing give the structure above a flat, stable base.

Concrete Footings

Continuous, spread, and pier footings carry the weight of walls, columns, pergolas, and outdoor kitchens down to firm soil. Trenches are dug to depth, reinforced, and ready for inspection before any concrete arrives on site.

Concrete Slabs & Floors

Garage floors, shed pads, equipment bases, and interior floors are poured 4 to 6 inches thick or more where loads demand it. Moisture barriers, planned joints, and a troweled or broom finish complete each slab.

Concrete Steps & Stairs

Entry steps, porch landings, and garden stairs are formed with even risers, deep treads, and slip-resistant finishes. We also repair or rebuild crumbling steps and shape curved or custom designs that suit your entry.

Concrete Sidewalks & Walkways

Front walks, garden paths, and side-yard routes are graded to shed water away from your home. Choose plain, stamped, or colored concrete, and we remove the old cracked walk before the new one goes in.

Concrete Driveway Installation

New and replacement driveways rest on compacted road base with rebar or wire mesh in the slab. Finish options include smooth, brushed, stamped, and exposed aggregate, all sized to the vehicles you park every day.

Concrete Patio Installation

Backyard patios become outdoor rooms for dining, lounging, and entertaining. We grade each slab for drainage, add stamped, colored, or broom finishes, and seal the surface against stains, moisture, and strong summer sun.

Concrete Demolition & Removal

Cracked driveways, sunken patios, and failing slabs are broken out, loaded, and hauled away. Controlled breaking and saw cuts protect the concrete, landscaping, and structures that stay, leaving clean ground ready for new work.

Stamped Concrete

Patterns that echo slate, stone, brick, tile, and wood plank are pressed into fresh concrete, then colored and sealed. Stamped surfaces suit patios, driveways, walkways, and pool decks where you want character without loose pavers.

Exposed Aggregate Concrete

Washing away the surface paste reveals the natural stone inside the mix. The result is a pebbled, slip-resistant texture that grips well on driveways, pool surrounds, and sloped walkways while hiding everyday dirt and tire marks.

Salt Finish Concrete

Rock salt pressed into fresh concrete and later rinsed away leaves a softly pitted texture. This subtle, slip-resistant finish is a favorite for pool decks and patios, and it pairs nicely with integral color or stain.

Colored Concrete

Integral pigments, color hardeners, and stains give concrete earth tones or bold contemporary shades. We can match or complement existing surfaces and protect the color with sealers that resist UV fading and weather.

Seeded Aggregate Concrete

Decorative stones and pebbles are scattered across the fresh surface by hand, embedded, and then exposed. Natural or colorful stone mixes create a custom, textured finish with strong traction for driveways and busy walkways.

Custom Concrete Joint Designs

Control joints do more than prevent random cracking. Tooled or saw-cut lines can form grids, diamonds, radial patterns, and borders that give driveways, patios, and commercial slabs a crisp, finished look, with sealed joints that last.

Concrete Sealing & Maintenance

Cleaning, crack repair, and a fresh coat of sealer protect concrete from oil, water, and sun damage. Resealing every 2 to 3 years keeps decorative finishes vivid and helps plain concrete resist stains.

Decorative Concrete Resurfacing

Sound but tired concrete gets a new face with microtoppings, stamped overlays, and textured coatings. Resurfacing refreshes patios, walkways, pool decks, and garage floors without the time and mess of a full tear-out.

Concrete Monuments

Address markers, entry monuments, and community signs are cast with crisp lettering and finishes that match your architecture. Each piece stands on a proper footing so it stays plumb and legible for years.

Concrete Sculptures & Art Pieces

Garden sculptures, relief panels, and one-of-a-kind art pieces begin as a sketch and take shape in a custom mold. Lightweight GFRC opens up thinner, more detailed forms for patios, courtyards, and entries.

Concrete Fountains

Tiered, wall, basin, and spillway fountains bring moving water into your garden or courtyard. Waterproofed basins, sleeves planned into the pour, and sealed finishes help each fountain look and sound its best.

Outdoor Concrete BBQs

Grill islands, countertops, and bar tops are built around your grill's specifications. Concrete surfaces handle heat and outdoor use, and a food-safe sealer helps them resist grease, marinades, and sun.

Concrete Fireplaces & Fire Pits

Fire pits, fire tables, and outdoor fireplaces become the gathering point of a backyard. Heat-conscious design, proper clearances, and finishes that match your patio make each fire feature safe, comfortable, and inviting.

Concrete Benches

Freestanding benches, built-in wall seats, and courtyard seating are cast at comfortable heights with eased edges. Colors, textures, and sealers are chosen to match your patio, garden, or commercial plaza.

Custom Architectural Concrete

Board-formed walls, columns, wall caps, planters, and facade details are shaped to match the character of your home. These custom elements carry the same design language from the entry to the backyard.

Stone Masonry

Fieldstone, flagstone, ledgestone, and river rock are set as walls, veneers, columns, and planters. Whether dry-stacked or mortared, natural stone brings an organic look that settles easily into mature gardens and landscaping.

Brick Masonry

Brick walls, planters, columns, and veneers are laid in running, Flemish, herringbone, or basket weave bonds. Reinforcement and properly mixed mortar help each brick project stand up to earthquake country.

Block Masonry

Concrete block builds garden walls, planters, outdoor kitchen bases, and small structures. Grouted cells and rebar add strength, while split-face, stucco, or veneer finishes turn plain block into a polished feature.

Tile Installation

Porcelain and natural stone tile are set over concrete patios, entries, steps, and indoor floors. Crack-isolation membranes, correct slope, and slip-rated tile keep every surface attractive, safe, and firmly bonded for years.

Concrete Block Walls

Property line, perimeter, privacy, and sound walls rise on reinforced footings with grouted, rebar-filled cells. Caps, pilasters, and stucco or split-face finishes give each wall a clean, intentional appearance from the street.

Masonry Repair & Restoration

Repointing, brick and block replacement, stone resetting, and efflorescence cleanup bring aging masonry back to life. We match mortar color, joint profile, and texture so every repair blends with the original work.

Concrete Pumping

Pumped concrete travels through a hose to backyards, hillside lots, and tight side yards that a truck chute cannot reach. That means cleaner access, fewer wheelbarrow trips across your lawn, and a faster, more even placement on pour day.

Concrete Pressure Washing

Oil drips, tire marks, algae, and months of dust come off driveways, walkways, patios, and parking areas. We adjust pressure to each surface, protecting stamped and colored finishes while preparing concrete for sealing or repair.

Landscaping Services

Turf, drainage solutions, tree trimming, stonework, pavers, and terraced slopes come together around solid hardscape. Because concrete is our core, every planting bed, path, and water feature sits on ground that is graded and ready.